Fluid Nozzle(20) - List of Manufacturers, Suppliers, Companies and Products | IPROS

Fluid Nozzle Product List

1～25 item / All 25 items

Displayed results
2-fluid nozzle "Full Cone Nozzle (Small Spray) CBIMJ"

2-fluid nozzle "Full Cone Nozzle (Small Spray) CBIMJ"

Wide range of flow adjustment! A full cone nozzle that generates a fine mist with an average particle diameter of 100μm or less.

The "Full Cone Nozzle (Low Volume Spray) CBIMJ" is a two-fluid full cone nozzle that generates a fine mist with an average particle diameter of 100μm or less, featuring a circular spray pattern with an even flow distribution. It consists of four components: nozzle tip, core, cap, and adapter, and is a liquid pressurized type that supplies liquid to the two-fluid nozzle under pressure. The spray angle is 20°. It is an internal mixing type that atomizes by mixing compressed air and liquid inside the nozzle. 【Features】 ○ Circular spray pattern with even flow distribution ○ Wide range of spray flow adjustment ○ Minimum spray flow in two-fluid operation ○ Compact type ○ Structure resistant to clogging For more details, please contact us or download the catalog.

  • Water and sewerage pipe fittings
  • Fluid Nozzle

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
2-fluid nozzle "Full Cone Nozzle (Large Spray) GSIM II"

2-fluid nozzle "Full Cone Nozzle (Large Spray) GSIM II"

Wide flow adjustment range! A two-fluid filled conical nozzle that generates a large volume of fine mist.

The "Full Cone Nozzle (Large Spray) GSIM II" is a two-fluid full cone nozzle that has a wide flow adjustment range and generates a large volume of fine mist. It is a two-fluid nozzle composed of multiple parts including a nozzle tip, whirler, adapter, air pipe, and liquid pipe, and it is a liquid pressurization type that supplies liquid under pressure to the two-fluid nozzle. The spray angle can be selected from 20° or 60°. With a air-to-water ratio of 130, it has an average particle diameter of 50μm and a maximum particle diameter of 150μm, designed for low air-to-water ratio. 【Features】 ○ Large flow type ○ Energy-saving nozzle with low air-to-water ratio design ○ Wide flow adjustment range ○ Spray angle of 20° or 60° ○ Rich series lineup For more details, please contact us or download the catalog.

  • Water and sewerage pipe fittings
  • Fluid Nozzle

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
2-fluid nozzle "Full cone nozzle (small spray / compact) SCBIMJ"

2-fluid nozzle "Full cone nozzle (small spray / compact) SCBIMJ"

Super compact type! A small spray conical nozzle with a wide flow adjustment range.

The "Charging Cone Nozzle (Small Amount Spray / Ultra Compact) SCBIMJ" consists of four parts: nozzle tip, core, cap, and adapter, and is a two-fluid charging cone nozzle that generates a fine mist with an average particle diameter of less than 100μm. It is an internal mixing type that atomizes by mixing compressed air and liquid inside the nozzle. (Compressed air flows in the center of the nozzle, while liquid flows around the outer perimeter in an internal mixing air type.) It is a liquid pressurization type that supplies liquid to the two-fluid nozzle under pressure. 【Features】 ○ Circular spray pattern with uniform flow distribution ○ Minimum spray flow rate among two fluids ○ Ultra-compact shape with a total length of about 42mm ○ ON-OFF control function included ○ Liquid pressurization type that sprays at a pressure of approximately 0.1 to 0.3 MPa For more details, please contact us or download the catalog.

  • Water and sewerage pipe fittings
  • Fluid Nozzle

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
2-fluid nozzle "Filled Cone Nozzle LSIM"

2-fluid nozzle "Filled Cone Nozzle LSIM"

Lightweight and compact type! Ultra-low pressure mist generation two-fluid charging cone nozzle.

The "Charging Cone Nozzle LSIM" is a large flow two-fluid charging cone nozzle composed of multiple parts such as a nozzle tip, cap, adapter, and O-ring, capable of generating a fine mist with an average particle diameter of 40μm or more. It features an internal mixing design that atomizes by mixing compressed air and liquid inside the nozzle. (Liquid flows in the center of the nozzle, while compressed air flows around the outer perimeter in an internal mixing external air type.) It is a liquid pressurization type that supplies pressurized liquid to the two-fluid nozzle. 【Features】 ○ Low running costs due to blower air specifications ○ Maximum particle diameter of 150μm at an average particle diameter of 80μm ○ Atomization design nozzle with no coarse particles ○ Compact and lightweight ○ Spray angle of 20° For more details, please contact us or download the catalog.

  • Water and sewerage pipe fittings
  • Fluid Nozzle

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
2-fluid nozzle "Fan-shaped nozzle VVEA"

2-fluid nozzle "Fan-shaped nozzle VVEA"

Fine mist and medium mist generated! A two-fluid fan-shaped nozzle capable of thin spraying in the thickness direction with strong impact force.

The "Fan-Shaped Nozzle VVEA" is a two-fluid nozzle composed of multiple parts including a nozzle tip, cap, mixing adapter, and liquid socket. It features internal mixing, where compressed air and liquid are mixed inside the nozzle for atomization. (It is a pre-mix type that mixes liquid and compressed air within the nozzle adapter.) The liquid is pressurized and supplied to the two-fluid nozzle, spraying at a pressure of approximately 0.2 to 0.7 MPa. 【Features】 ○ A nozzle that sprays fine mist with a thin thickness and uniform distribution. ○ A two-fluid fan-shaped nozzle that generates fine mist with an average particle diameter of over 50 μm. ○ Capable of spraying with a thin thickness in the thickness direction and strong impact force. ○ A liquid pressurization type that sprays at a pressure of approximately 0.2 to 0.7 MPa. ○ It has a wide flow adjustment range with minimal variation in spray angle. For more details, please contact us or download the catalog.

  • Water and sewerage pipe fittings
  • Fluid Nozzle

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
2-fluid nozzle "Fan-shaped nozzle VVP+AS"

2-fluid nozzle "Fan-shaped nozzle VVP+AS"

Built-in check valve on the air side! Mist fan-shaped nozzle usable for both 1 and 2 fluid specifications.

The "Fan-Shaped Nozzle VVP+AS" is a fog fan-shaped nozzle composed of multiple parts including the nozzle body, adapter, air socket, and check valve, and can be used in both single-fluid and dual-fluid configurations. It features an internal mixing design that atomizes by mixing compressed air and liquid inside the nozzle. A check valve is built into the air side, allowing it to be used as a single-fluid nozzle in the medium to high water flow range and as a dual-fluid nozzle in the low water flow range. It is a liquid pressurization type that supplies liquid to the dual-fluid nozzle. 【Features】 - Usable in both single-fluid and dual-fluid configurations - Single-fluid in medium to high water flow range, dual-fluid in low water flow range - Wide turn-down ratio (throttle ratio) of 1:20 - Suitable for use in environments with minimal variation in flow distribution and spray angle - Built-in check valve on the air side For more details, please contact us or download the catalog.

  • Water and sewerage pipe fittings
  • Fluid Nozzle

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
2-fluid nozzle "Fan-shaped nozzle DDRP+AS"

2-fluid nozzle "Fan-shaped nozzle DDRP+AS"

Compatible with multi-variety production! Mist fan-shaped nozzle usable with both 1st and 2nd fluid specifications.

The "Fan-Shaped Nozzle DDRP+AS" is a fog fan-shaped nozzle composed of multiple parts including the nozzle body, adapter, air socket, and check valve, and can be used in both single-fluid and dual-fluid configurations. It features an internal mixing design that atomizes by mixing compressed air and liquid inside the nozzle. A check valve is built into the air side, allowing it to be used as a single-fluid nozzle in medium to high water flow ranges and as a dual-fluid nozzle in low water flow ranges. It is a liquid pressurization type that supplies liquid to the dual-fluid nozzle. 【Features】 - Usable in both single-fluid and dual-fluid configurations - Single-fluid in medium to high water flow ranges, dual-fluid in low water flow ranges - Wide turn-down ratio (throttle ratio) of 1:20 - Suitable for use in environments with minimal variation in flow distribution and spray angle - Spray pattern thickness angle of 60°, allowing for surface cooling For more details, please contact us or download the catalog.

  • Water and sewerage pipe fittings
  • Fluid Nozzle

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
2-fluid nozzle "Fan-shaped nozzle (small amount spray / ultra-compact) SCBIMV"

2-fluid nozzle "Fan-shaped nozzle (small amount spray / ultra-compact) SCBIMV"

Super compact type! A small spray fan nozzle with a wide flow adjustment range.

The "Fan-Shaped Nozzle (Small Amount Spray / Ultra Compact) SCBIMV" consists of four components: nozzle tip, core, cap, and adapter, and is a two-fluid fan-shaped nozzle that generates a fine mist with an average particle diameter of less than 100μm. It is an internal mixing type that atomizes by mixing compressed air and liquid inside the nozzle. (Compressed air flows in the center of the nozzle, while liquid flows around the outer circumference in an internal mixing air type.) It is a liquid pressurization type that supplies pressurized liquid to the two-fluid nozzle. 【Features】 ○ Switchable between two spray patterns: uniform & triangular distribution ○ Minimum spray flow rate among two-fluid systems ○ Wide flow adjustment range ○ Ultra compact type with a total length of approximately 42mm ○ Equipped with ON-OFF control function For more details, please contact us or download the catalog.

  • Water and sewerage pipe fittings
  • Fluid Nozzle

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
2-fluid nozzle "Fan-shaped nozzle (fine mist / ultra-compact) SCBIMV.S"

2-fluid nozzle "Fan-shaped nozzle (fine mist / ultra-compact) SCBIMV.S"

Super compact type! A small spray fan-shaped nozzle with an even flow distribution across the entire area.

The "Fan-Shaped Nozzle (Fine Mist / Ultra Compact) SCBIMV.S" consists of four components: nozzle tip, core, cap, and adapter, and is a two-fluid fan-shaped nozzle that generates fine mist with an average particle diameter of less than 30μm. It features an internal mixing design that atomizes by mixing compressed air and liquid inside the nozzle. (Compressed air flows in the center of the nozzle, while liquid flows around the outer perimeter in an internal mixing air type.) It is a suction type that draws up the liquid and sprays it using the force of compressed air. 【Features】 ○ Uniform spray pattern with consistent flow rate across the entire area ○ Minimum spray flow rate among two fluids ○ Ultra compact shape with an overall length of approximately 42mm ○ No need for equipment to pressurize the liquid ○ Equipped with ON-OFF control function For more details, please contact us or download the catalog.

  • Water and sewerage pipe fittings
  • Fluid Nozzle

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
2-fluid nozzle "Fan-shaped nozzle (small amount spray) CBIMV"

2-fluid nozzle "Fan-shaped nozzle (small amount spray) CBIMV"

Small spray type! A two-fluid fan-shaped nozzle that generates a fine mist with an average particle diameter of 100μm or less.

The "Fan-Shaped Nozzle (Small Amount Spray) CBIMV" is a mist generation nozzle that can switch between two spray patterns: uniform and triangular distribution. It is a two-fluid fan-shaped nozzle that generates mist with an average particle diameter of less than 100μm. It is a liquid pressurization type that sprays at a pressure of approximately 0.1 to 0.3 MPa. It can produce two patterns: a uniform flow distribution across the entire area and a triangular distribution that is strong in the center and gradually weakens towards the ends, offering a wide range of flow adjustment. 【Features】 ○ Switchable between uniform and triangular distribution, two spray patterns ○ Minimum spray flow in two fluids ○ Compact type ○ Structure resistant to clogging ○ Spray angles of 45°, 80°, and 110° For more details, please contact us or download the catalog.

  • Water and sewerage pipe fittings
  • Fluid Nozzle

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
2-fluid nozzle "Fan-shaped nozzle (small amount spray) CBIMV.S"

2-fluid nozzle "Fan-shaped nozzle (small amount spray) CBIMV.S"

Small spray type! A two-fluid fan-shaped nozzle that generates a fine mist with an average particle diameter of 30μm or less.

The "Fan-Shaped Nozzle (Small Amount Spray) CBIMV.S" is a space-saving, high-performance nozzle designed compactly from the BIM series of mist generation nozzles. It is a two-fluid fan-shaped nozzle that generates a fine mist with an average particle diameter of 30μm or less. It is a suction type that does not require a liquid pressurization device, as it uses compressed air to draw up the liquid and spray it. The two-fluid nozzle consists of four parts: a nozzle tip, core, cap, and adapter, providing an even flow distribution across the entire area. 【Features】 ○ Two-fluid fan-shaped nozzle that generates a fine mist with an average particle diameter of 30μm or less ○ Even spray pattern with uniform flow across the entire area ○ No device required for liquid pressurization ○ Compact type ○ Spray angle of 80° For more details, please contact us or download the catalog.

  • Water and sewerage pipe fittings
  • Fluid Nozzle

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
2-fluid nozzle "Hollow Cone Nozzle (Low Flow Spray) CBIMK"

2-fluid nozzle "Hollow Cone Nozzle (Low Flow Spray) CBIMK"

Compact type! Hollow cone nozzle that generates fine mist with an average particle diameter of 100μm or less.

The "Hollow Cone Nozzle (Low Volume Spray) CBIMK" is a two-fluid hollow cone nozzle that generates a fine mist with an average particle diameter of less than 100μm in an annular spray pattern. It consists of four components: nozzle tip, core, cap, and adapter, and is a liquid pressurized type that sprays at a pressure of approximately 0.1 to 0.3 MPa. It has a wide flow adjustment range with a spray angle of 60°. This is an internal mixing type that atomizes by mixing compressed air and liquid inside the nozzle. 【Features】 ○ Two-fluid hollow cone nozzle that generates a fine mist with an average particle diameter of less than 100μm ○ Liquid pressurized type that sprays at a pressure of approximately 0.1 to 0.3 MPa ○ Annular spray pattern ○ Wide range of spray flow adjustment ○ Structure that is resistant to clogging For more details, please contact us or download the catalog.

  • Water and sewerage pipe fittings
  • Fluid Nozzle

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
2-fluid nozzle "Hollow Cone Nozzle (Low Flow Spray) CBIMK.S"

2-fluid nozzle "Hollow Cone Nozzle (Low Flow Spray) CBIMK.S"

Suction type! Hollow cone nozzle that generates a fine mist with an average particle diameter of 30μm or less.

The "Hollow Cone Nozzle (Small Amount Spray) CBIMK.S" is a two-fluid hollow cone nozzle that generates a fine mist with an average particle diameter of 30μm or less, featuring an annular spray pattern. It is a suction-type two-fluid nozzle composed of four parts: nozzle tip, core, cap, and adapter, which uses compressed air to draw up and spray the liquid. It has a spray angle of 60° and employs internal mixing to atomize the liquid with compressed air inside the nozzle. 【Features】 ○ Two-fluid hollow cone nozzle that generates a fine mist with an average particle diameter of 30μm or less ○ Suction type that does not require a liquid pressurization device ○ Annular spray pattern ○ Spray angle of 60° ○ Compact type For more details, please contact us or download the catalog.

  • Water and sewerage pipe fittings
  • Fluid Nozzle

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
2-fluid nozzle "Fan-shaped nozzle DOVEA"

2-fluid nozzle "Fan-shaped nozzle DOVEA"

Fine mist and medium mist generated! A two-fluid fan-shaped nozzle with a large flow adjustment range and small spray angle variation.

The "Fan-Shaped Nozzle DOVEA" consists of four components: the nozzle body, pipe, mixing adapter, and liquid pipe. It is a high-flow two-fluid fan-shaped nozzle that generates fine mist with an average particle diameter of 50μm or more. It features internal mixing, where compressed air and liquid are mixed inside the nozzle for atomization (a pre-mix type that mixes liquid and compressed air within the nozzle adapter). The liquid is pressurized and supplied to the two-fluid nozzle, spraying at a pressure of approximately 0.07 to 0.7 MPa. 【Features】 ○ Uniform flow rate and particle size across the entire range ○ Wide adjustment range for spray flow rate with minimal spray angle variation ○ Large foreign object passage diameter, making it resistant to clogging ○ Uniform flow distribution, suitable for use in multiple arrangements ○ Spray angles of 55°, 70°, 95°, and 110° For more details, please contact us or download the catalog.

  • Water and sewerage pipe fittings
  • Fluid Nozzle

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
2-fluid nozzle "Fan-shaped nozzle DDA"

2-fluid nozzle "Fan-shaped nozzle DDA"

Fine mist and medium mist generation! A two-fluid elliptical spray nozzle that produces a large volume of fine mist with a diameter of 50μm or more.

The "Fan-Shaped Nozzle DDA" consists of four components: the nozzle body, pipe, mixing adapter, and liquid pipe, and it is a high-flow two-fluid elliptical spray nozzle that generates fine mist with an average particle diameter of 50μm or more. It is an internal mixing type that atomizes by mixing compressed air and liquid inside the nozzle. (It is a pre-mixing type that mixes liquid and compressed air within the nozzle adapter.) The liquid is pressurized and supplied to the two-fluid nozzle, spraying at a pressure of approximately 0.07 to 0.7 MPa. 【Features】 ○ Has an elliptical spray pattern, allowing for wide-area spraying ○ Liquid pressurization type that sprays at a pressure of approximately 0.07 to 0.7 MPa ○ Wide range of spray flow adjustment with minimal spray angle variation ○ Large foreign object passage diameter, making it resistant to clogging ○ Uniform flow distribution, suitable for use in multiple arrangements For more details, please contact us or download the catalog.

  • Water and sewerage pipe fittings
  • Fluid Nozzle

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
1 Fluid Nozzle (Straight) "Straight Nozzle (Round Bottom Specification) CCRP"

1 Fluid Nozzle (Straight) "Straight Nozzle (Round Bottom Specification) CCRP"

A structure that is resistant to clogging! A straight nozzle that generates strong impact force flow.

The "Straight Nozzle (Round Bottom Type) CCRP" is a straight nozzle that generates a strong impact flow with a narrow, straight spray pattern. When installed on a header pipe, the nozzle inlet protrudes roundly into the pipe, making it less likely for foreign objects to clog the nozzle inlet. It is ideal for cleaning applications such as paper felts, screens, machinery, components, vehicles, transport boxes, and bottles. It is used in the paper, pulp, printing, and food industries. 【Features】 ○ Narrow, straight spray pattern ○ Structure that minimizes the inflow of foreign objects into the nozzle ○ Resistant to clogging ○ Straight nozzle that generates a strong impact flow ○ All-metal integrated nozzle For more details, please contact us or download the catalog.

  • Water and sewerage pipe fittings
  • Fluid Nozzle

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
2-fluid nozzle "Full Cone Nozzle JOKIJet"

2-fluid nozzle "Full Cone Nozzle JOKIJet"

Low running costs! Two-fluid filling cone nozzle using steam instead of compressed air.

The "JOKIJet Conical Nozzle" is a two-fluid conical nozzle composed of multiple parts such as the nozzle body, adapter, O-ring, and flange, using steam instead of compressed air. It features external mixing, where compressed air and liquid are mixed outside the nozzle for atomization. It is a liquid pressurization type that supplies pressurized liquid to the two-fluid nozzle. Due to its steam specification, it can be used at low running costs in factories with boiler facilities. 【Features】 ○ Steam-driven nozzle ○ Two-fluid conical nozzle ○ Available at low running costs ○ External mixing type ○ Liquid pressurization type For more details, please contact us or download the catalog.

  • Water and sewerage pipe fittings
  • Fluid Nozzle

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
1 Fluid Nozzle (Straight) "Straight Nozzle (Standard) CCP"

1 Fluid Nozzle (Straight) "Straight Nozzle (Standard) CCP"

High spray flow! A straight nozzle that generates the strongest impact stream.

The "Straight Nozzle (Standard) CCP" is a straight nozzle that generates the strongest impact stream with a narrow, straight spray pattern. Its internal design minimizes liquid resistance, resulting in a spray flow rate that is significantly larger than other straight nozzles of the same nozzle diameter. It also features a structure that is less affected by internal turbulence. It is ideal for high-pressure cleaning of paper felts, screens, vehicles, chests, machinery, parts, and for trimming applications such as paper making and asbestos slate. 【Features】 ○ Narrow, straight spray pattern ○ Straight nozzle that generates the strongest impact stream ○ Internal design that minimizes liquid resistance ○ Achieves a very large spray flow rate ○ Structure resistant to internal turbulence For more details, please contact us or download the catalog.

  • Water and sewerage pipe fittings
  • stone
  • Fluid Nozzle

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
1 Fluid Nozzle (Others) "Pipe Cleaning Nozzle RSP"

1 Fluid Nozzle (Others) "Pipe Cleaning Nozzle RSP"

Injecting a straight flow and self-propelling inside the pipe! A pipe cleaning nozzle perfect for removing scale and rust.

The "Washing Pipe Nozzle RSP" generates a strong impact jet flow directed forward, diagonally forward, sideways, and diagonally backward, allowing it to self-propel within the pipe through reaction force. It is a one-piece nozzle that can be manufactured with specified hole diameters and numbers in any of the forward, diagonally forward, sideways, and diagonally backward directions. It is ideal for cleaning pipes, water supply pipes, sewage pipes, heat exchangers, and tubes of refrigeration units, especially for cleaning the inner surfaces of contaminated pipes with scale buildup. The available thread sizes are 1/8M, 1/4M, 3/8M, and 1/2M. 【Features】 ○ Generates a strong impact jet flow directed forward, diagonally forward, sideways, and diagonally backward ○ Self-propelling washing pipe nozzle through reaction force ○ Suitable for cleaning the inner surfaces of contaminated pipes with scale buildup ○ Available thread sizes range from 1/8 to 1/2M For more details, please contact us or download the catalog.

  • Water and sewerage pipe fittings
  • Fluid Nozzle

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
1 Fluid Nozzle (Straight) "Porous Nozzle (2-Hole Type) 2CCP"

1 Fluid Nozzle (Straight) "Porous Nozzle (2-Hole Type) 2CCP"

Compact design! Multi-hole straight nozzle that generates multiple strong impact rod flows.

The "Multi-Hole Nozzle (2-Hole Type) 2CCP" is a multi-hole straight nozzle that generates multiple strong jet streams in a narrow, straight spray pattern. It features a compact design with an all-metal integrated nozzle in a 2-hole type. It is ideal for cleaning applications such as paper felts, screens, dandy rolls, machine parts, vehicles, bottles, and shipping boxes. It is used in industries such as paper, pulp, printing, food, and transportation. 【Features】 - Spray pattern with two narrow, straight jet streams - Straight nozzle that generates multiple strong jet streams - 2-hole type - Compact design - All-metal integrated nozzle For more details, please contact us or download the catalog.

  • Water and sewerage pipe fittings
  • Fluid Nozzle

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
1 Fluid Nozzle (Straight) "Porous Nozzle (7-Hole Type) 7CCP"

1 Fluid Nozzle (Straight) "Porous Nozzle (7-Hole Type) 7CCP"

Compact design! Multi-hole straight nozzle that generates multiple strong impact rod flows.

The "Multi-Hole Nozzle (7-Hole Type) 7CCP" features a spray pattern with seven narrow, straight streams that generate multiple strong impact streams. It is a compact, all-metal integrated nozzle designed with seven holes. It is ideal for cleaning applications such as paper felts, screens, dandy rolls, machine parts, vehicles, bottles, and shipping boxes. It is used in industries such as paper, pulp, printing, food, and transportation. 【Features】 - Spray pattern with seven narrow, straight streams - Straight nozzle that generates multiple strong impact streams - 7-hole type - Compact design - All-metal integrated nozzle For more details, please contact us or download the catalog.

  • Water and sewerage pipe fittings
  • Fluid Nozzle

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
2-fluid nozzle "Charging Cone Nozzle JJA"

2-fluid nozzle "Charging Cone Nozzle JJA"

Fine mist and medium mist generated! A two-fluid spray cone nozzle with a simple structure that is easy to maintain.

The "Charging Cone Nozzle JJA" consists of multiple components including the nozzle body, mixing adapter, liquid pipe, and flange, and is a large flow two-fluid charging cone nozzle that generates fine mist and medium mist with an average particle diameter of 130μm or more. It features an internal mixing design that atomizes by mixing compressed air and liquid inside the nozzle. (It is a pre-mixing type that mixes liquid and compressed air within the nozzle adapter.) It is a liquid pressurization type that supplies pressurized liquid to the two-fluid nozzle. 【Features】 ○ Uniform particle diameter across the entire range ○ Wide adjustment range for spray flow rate ○ Large foreign object passage diameter, making it less prone to clogging ○ Wastewater combustion in waste incineration plants ○ Easy maintenance due to its simple structure For more details, please contact us or download the catalog.

  • Water and sewerage pipe fittings
  • Fluid Nozzle

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
1 Fluid Nozzle (Others) "In-liquid Injection Nozzle (for Liquid Agitation) EJX High Flow Rate"

1 Fluid Nozzle (Others) "In-liquid Injection Nozzle (for Liquid Agitation) EJX High Flow Rate"

Simple structure! A high-speed nozzle with approximately 1.5 to 2 times the striking power of EJX.

The "Liquid Injection Nozzle (for Liquid Agitation) EJX High Flow Rate" is a nozzle that creates a negative pressure inside when liquid is injected, drawing in surrounding liquid and discharging 3 to 4 times the amount of supplied liquid. It is a high flow rate type with approximately 1.5 to 2 times the impact force (flow rate) of the EJX (Liquid Injection Nozzle). It features a simple structure and a compact, lightweight design. The standard pressure is 0.1 MPa. It is ideal for applications such as preventing sedimentation, resolving concentration differences, liquid agitation, in-liquid cleaning, in-liquid etching, and promoting plating. 【Features】 ○ Used in liquid ○ Draws in surrounding liquid and discharges 3 to 4 times the amount of supplied liquid ○ Simple and compact shape ○ Compact and lightweight design ○ High flow rate type with approximately 1.5 to 2 times the impact force of EJX For more details, please contact us or download the catalog.

  • Water and sewerage pipe fittings
  • Fluid Nozzle

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
First-class fluid nozzle "Charging Angle Cone Nozzle SSXP"

First-class fluid nozzle "Charging Angle Cone Nozzle SSXP"

Hard to clog! A right square spray pattern nozzle with uniform flow distribution.

The "Charging Cone Nozzle SSXP" features a square spray pattern and provides an even flow distribution. With a wide spray angle of 90° to 100°, it covers a large area. It resolves the "gap" issue that occurs when multiple rows of circular spray pattern charging cone nozzles are arranged. The nozzle consists of two parts: the nozzle body and an X-shaped wobbler, forming an integrated nozzle with the wobbler press-fitted into the body. The use of an X-shaped wobbler in the rotary element allows for a large foreign object passage diameter, making it less prone to clogging. 【Features】 ○ Even flow distribution with a square spray pattern ○ Wide spray angle of 90° to 100° ○ Structure with a large foreign object passage diameter, resistant to clogging ○ Composed of two parts: the nozzle body and the X-shaped wobbler ○ Integrated nozzle with the wobbler press-fitted into the body For more details, please contact us or download the catalog.

  • Water Treatment
  • Aggregates and crushed stone
  • Water and sewerage pipe fittings
  • Fluid Nozzle

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
1 Fluid Nozzle (Straight) "Straight Nozzle (Round Bottom Specification) CRP (AL99)"

1 Fluid Nozzle (Straight) "Straight Nozzle (Round Bottom Specification) CRP (AL99)"

A structure that is resistant to clogging! A straight nozzle that generates a strong impact flow.

The "Straight Nozzle (Round Bottom Type) CRP(AL99)" is a straight nozzle that generates a strong impact stream with a narrow, straight spray pattern. When attached to a header pipe, the nozzle inlet protrudes roundly into the pipe, making it less likely for foreign objects to clog the nozzle inlet. The CRP(AL99) series (with ceramic chips) maintains stable performance over a long period due to the use of high-hardness chips. 【Features】 ○ Narrow, straight spray pattern ○ Structure that minimizes the inflow of foreign objects into the nozzle ○ Resistant to clogging ○ Straight nozzle that generates a strong impact stream ○ Excellent wear resistance For more details, please contact us or download the catalog.

  • Water and sewerage pipe fittings
  • Fluid Nozzle

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Related Categories of Fluid Nozzle

COPYRIGHT © 2001-2026 IPROS CORPORATION ALL RIGHTS RESERVED.